@@ -141,7 +141,7 @@ mGBA is Copyright © 2013 – 2015 Jeffrey Pfau. It is distributed under the [Mozilla Public License version 2.0](https://www.mozilla.org/MPL/2.0/). A copy of the license is available in the distributed LICENSE file.
 
 mGBA contains the following third-party libraries:
 
-- [inih](https://code.google.com/p/inih/), which is copyright © 2009 Brush Technology and used under a BSD 3-clause license.
+- [inih](https://code.google.com/p/inih/), which is copyright © 2009 Ben Hoyt and used under a BSD 3-clause license.
 - [blip-buf](https://code.google.com/p/blip-buf/), which is copyright © 2003 – 2009 Shay Green and used under a Lesser GNU Public License.
 - [LZMA SDK](http://www.7-zip.org/sdk.html), which is public domain.
 - [MurmurHash3](https://code.google.com/p/smhasher/wiki/MurmurHash3) implementation by Austin Appleby, which is public domain.

@@ -1,27 +1,27 @@
-
-The "inih" library is distributed under the New BSD license:
-
-Copyright (c) 2009, Brush Technology
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-    * Neither the name of Brush Technology nor the names of its contributors
-      may be used to endorse or promote products derived from this software
-      without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY BRUSH TECHNOLOGY ''AS IS'' AND ANY
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL BRUSH TECHNOLOGY BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+The "inih" library is distributed under the New BSD license:
+
+Copyright (c) 2009, Ben Hoyt
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of Ben Hoyt nor the names of its contributors
+      may be used to endorse or promote products derived from this software
+      without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY BEN HOYT ''AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL BEN HOYT BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

@@ -0,0 +1,104 @@
+**inih (INI Not Invented Here)** is a simple [.INI file](http://en.wikipedia.org/wiki/INI_file) parser written in C. It's only a couple of pages of code, and it was designed to be _small and simple_, so it's good for embedded systems. It's also more or less compatible with Python's [ConfigParser](http://docs.python.org/library/configparser.html) style of .INI files, including RFC 822-style multi-line syntax and `name: value` entries.
+
+To use it, just give `ini_parse()` an INI file, and it will call a callback for every `name=value` pair parsed, giving you strings for the section, name, and value. It's done this way ("SAX style") because it works well on low-memory embedded systems, but also because it makes for a KISS implementation.
+
+You can also call `ini_parse_file()` to parse directly from a `FILE*` object, or `ini_parse_stream()` to parse using a custom reader to implement string-based or other custom I/O ([see example code](https://github.com/benhoyt/inih/blob/master/examples/ini_buffer.c)).
+
+Download a release, browse the source, or read about [how to use inih in a DRY style](http://blog.brush.co.nz/2009/08/xmacros/) with X-Macros.
+
+
+## Compile-time options ##
+
+  * **Multi-line entries:** By default, inih supports multi-line entries in the style of Python's ConfigParser. To disable, add `-DINI_ALLOW_MULTILINE=0`.
+  * **UTF-8 BOM:** By default, inih allows a UTF-8 BOM sequence (0xEF 0xBB 0xBF) at the start of INI files. To disable, add `-DINI_ALLOW_BOM=0`.
+  * **Stack vs heap:** By default, inih allocates its line buffer on the stack. To allocate on the heap using `malloc` instead, specify `-DINI_USE_STACK=0`.
+  * **Stop on first error:** By default, inih keeps parsing the rest of the file after an error. To stop parsing on the first error, add `-DINI_STOP_ON_FIRST_ERROR=1`.
+  * **Maximum line length:** The default maximum line length is 200 bytes. To override this, add something like `-DINI_MAX_LINE=1000`.
+
+
+## Simple example in C ##
+
+```c
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "../ini.h"
+
+typedef struct
+{
+    int version;
+    const char* name;
+    const char* email;
+} configuration;
+
+static int handler(void* user, const char* section, const char* name,
+                   const char* value)
+{
+    configuration* pconfig = (configuration*)user;
+
+    #define MATCH(s, n) strcmp(section, s) == 0 && strcmp(name, n) == 0
+    if (MATCH("protocol", "version")) {
+        pconfig->version = atoi(value);
+    } else if (MATCH("user", "name")) {
+        pconfig->name = strdup(value);
+    } else if (MATCH("user", "email")) {
+        pconfig->email = strdup(value);
+    } else {
+        return 0;  /* unknown section/name, error */
+    }
+    return 1;
+}
+
+int main(int argc, char* argv[])
+{
+    configuration config;
+
+    if (ini_parse("test.ini", handler, &config) < 0) {
+        printf("Can't load 'test.ini'\n");
+        return 1;
+    }
+    printf("Config loaded from 'test.ini': version=%d, name=%s, email=%s\n",
+        config.version, config.name, config.email);
+    return 0;
+}
+```
+
+
+## C++ example ##
+
+If you're into C++ and the STL, there is also an easy-to-use [INIReader class](https://github.com/benhoyt/inih/blob/master/cpp/INIReader.h) that stores values in a `map` and lets you `Get()` them:
+
+```cpp
+#include <iostream>
+#include "INIReader.h"
+
+int main()
+{
+    INIReader reader("../examples/test.ini");
+
+    if (reader.ParseError() < 0) {
+        std::cout << "Can't load 'test.ini'\n";
+        return 1;
+    }
+    std::cout << "Config loaded from 'test.ini': version="
+              << reader.GetInteger("protocol", "version", -1) << ", name="
+              << reader.Get("user", "name", "UNKNOWN") << ", email="
+              << reader.Get("user", "email", "UNKNOWN") << ", pi="
+              << reader.GetReal("user", "pi", -1) << ", active="
+              << reader.GetBoolean("user", "active", true) << "\n";
+    return 0;
+}
+```
+
+This simple C++ API works fine, but it's not very fully-fledged. I'm not planning to work more on the C++ API at the moment, so if you want a bit more power (for example `GetSections()` and `GetFields()` functions), see these forks:
+
+  * https://github.com/Blandinium/inih
+  * https://github.com/OSSystems/inih
+
+
+## Differences from ConfigParser ##
+
+Some differences between inih and Python's [ConfigParser](http://docs.python.org/library/configparser.html) standard library module:
+
+* INI name=value pairs given above any section headers are treated as valid items with no section (section name is an empty string). In ConfigParser having no section is an error.
+* Line continuations are handled with leading whitespace on continued lines (like ConfigParser). However, instead of concatenating continued lines together, they are treated as separate values for the same key (unlike ConfigParser).

@@ -1,5 +0,0 @@
-
-inih is a simple .INI file parser written in C, released under the New BSD
-license (see LICENSE.txt). Go to the project home page for more info:
-
-http://code.google.com/p/inih/

@@ -1,183 +1,187 @@
-/* inih -- simple .INI file parser
-
-inih is released under the New BSD license (see LICENSE.txt). Go to the project
-home page for more info:
-
-http://code.google.com/p/inih/
-
-*/
-
-#include <stdio.h>
-#ifndef PSP2
-#include <ctype.h>
-#endif
-#include <string.h>
-
-#include "ini.h"
-
-#if !INI_USE_STACK
-#include <stdlib.h>
-#endif
-
-#define MAX_SECTION 50
-#define MAX_NAME 50
-
-/* Strip whitespace chars off end of given string, in place. Return s. */
-static char* rstrip(char* s)
-{
-    char* p = s + strlen(s);
-    while (p > s && isspace((unsigned char)(*--p)))
-        *p = '\0';
-    return s;
-}
-
-/* Return pointer to first non-whitespace char in given string. */
-static char* lskip(const char* s)
-{
-    while (*s && isspace((unsigned char)(*s)))
-        s++;
-    return (char*)s;
-}
-
-/* Return pointer to first char c or ';' comment in given string, or pointer to
-   null at end of string if neither found. ';' must be prefixed by a whitespace
-   character to register as a comment. */
-static char* find_char_or_comment(const char* s, char c)
-{
-    int was_whitespace = 0;
-    while (*s && *s != c && !(was_whitespace && *s == ';')) {
-        was_whitespace = isspace((unsigned char)(*s));
-        s++;
-    }
-    return (char*)s;
-}
-
-/* Version of strncpy that ensures dest (size bytes) is null-terminated. */
-static char* strncpy0(char* dest, const char* src, size_t size)
-{
-    strncpy(dest, src, size);
-    dest[size - 1] = '\0';
-    return dest;
-}
-
-/* See documentation in header file. */
-int ini_parse_file(FILE* file,
-                   int (*handler)(void*, const char*, const char*,
-                                  const char*),
-                   void* user)
-{
-    /* Uses a fair bit of stack (use heap instead if you need to) */
-#if INI_USE_STACK
-    char line[INI_MAX_LINE];
-#else
-    char* line;
-#endif
-    char section[MAX_SECTION] = "";
-    char prev_name[MAX_NAME] = "";
-
-    char* start;
-    char* end;
-    char* name;
-    char* value;
-    int lineno = 0;
-    int error = 0;
-
-#if !INI_USE_STACK
-    line = (char*)malloc(INI_MAX_LINE);
-    if (!line) {
-        return -2;
-    }
-#endif
-
-    /* Scan through file line by line */
-    while (fgets(line, INI_MAX_LINE, file) != NULL) {
-        lineno++;
-
-        start = line;
-#if INI_ALLOW_BOM
-        if (lineno == 1 && (unsigned char)start[0] == 0xEF &&
-                           (unsigned char)start[1] == 0xBB &&
-                           (unsigned char)start[2] == 0xBF) {
-            start += 3;
-        }
-#endif
-        start = lskip(rstrip(start));
-
-        if (*start == ';' || *start == '#') {
-            /* Per Python ConfigParser, allow '#' comments at start of line */
-        }
-#if INI_ALLOW_MULTILINE
-        else if (*prev_name && *start && start > line) {
-            /* Non-black line with leading whitespace, treat as continuation
-               of previous name's value (as per Python ConfigParser). */
-            if (!handler(user, section, prev_name, start) && !error)
-                error = lineno;
-        }
-#endif
-        else if (*start == '[') {
-            /* A "[section]" line */
-            end = find_char_or_comment(start + 1, ']');
-            if (*end == ']') {
-                *end = '\0';
-                strncpy0(section, start + 1, sizeof(section));
-                *prev_name = '\0';
-            }
-            else if (!error) {
-                /* No ']' found on section line */
-                error = lineno;
-            }
-        }
-        else if (*start && *start != ';') {
-            /* Not a comment, must be a name[=:]value pair */
-            end = find_char_or_comment(start, '=');
-            if (*end != '=') {
-                end = find_char_or_comment(start, ':');
-            }
-            if (*end == '=' || *end == ':') {
-                *end = '\0';
-                name = rstrip(start);
-                value = lskip(end + 1);
-                end = find_char_or_comment(value, '\0');
-                if (*end == ';')
-                    *end = '\0';
-                rstrip(value);
-
-                /* Valid name[=:]value pair found, call handler */
-                strncpy0(prev_name, name, sizeof(prev_name));
-                if (!handler(user, section, name, value) && !error)
-                    error = lineno;
-            }
-            else if (!error) {
-                /* No '=' or ':' found on name[=:]value line */
-                error = lineno;
-            }
-        }
-
-#if INI_STOP_ON_FIRST_ERROR
-        if (error)
-            break;
-#endif
-    }
-
-#if !INI_USE_STACK
-    free(line);
-#endif
-
-    return error;
-}
-
-/* See documentation in header file. */
-int ini_parse(const char* filename,
-              int (*handler)(void*, const char*, const char*, const char*),
-              void* user)
-{
-    FILE* file;
-    int error;
-
-    file = fopen(filename, "r");
-    if (!file)
-        return -1;
-    error = ini_parse_file(file, handler, user);
-    fclose(file);
-    return error;
-}
+/* inih -- simple .INI file parser
+
+inih is released under the New BSD license (see LICENSE.txt). Go to the project
+home page for more info:
+
+https://github.com/benhoyt/inih
+
+*/
+
+#ifdef _MSC_VER
+#define _CRT_SECURE_NO_WARNINGS
+#endif
+
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+
+#include "ini.h"
+
+#if !INI_USE_STACK
+#include <stdlib.h>
+#endif
+
+#define MAX_SECTION 50
+#define MAX_NAME 50
+
+/* Strip whitespace chars off end of given string, in place. Return s. */
+static char* rstrip(char* s)
+{
+    char* p = s + strlen(s);
+    while (p > s && isspace((unsigned char)(*--p)))
+        *p = '\0';
+    return s;
+}
+
+/* Return pointer to first non-whitespace char in given string. */
+static char* lskip(const char* s)
+{
+    while (*s && isspace((unsigned char)(*s)))
+        s++;
+    return (char*)s;
+}
+
+/* Return pointer to first char c or ';' comment in given string, or pointer to
+   null at end of string if neither found. ';' must be prefixed by a whitespace
+   character to register as a comment. */
+static char* find_char_or_comment(const char* s, char c)
+{
+    int was_whitespace = 0;
+    while (*s && *s != c && !(was_whitespace && *s == ';')) {
+        was_whitespace = isspace((unsigned char)(*s));
+        s++;
+    }
+    return (char*)s;
+}
+
+/* Version of strncpy that ensures dest (size bytes) is null-terminated. */
+static char* strncpy0(char* dest, const char* src, size_t size)
+{
+    strncpy(dest, src, size);
+    dest[size - 1] = '\0';
+    return dest;
+}
+
+/* See documentation in header file. */
+int ini_parse_stream(ini_reader reader, void* stream, ini_handler handler,
+                     void* user)
+{
+    /* Uses a fair bit of stack (use heap instead if you need to) */
+#if INI_USE_STACK
+    char line[INI_MAX_LINE];
+#else
+    char* line;
+#endif
+    char section[MAX_SECTION] = "";
+    char prev_name[MAX_NAME] = "";
+
+    char* start;
+    char* end;
+    char* name;
+    char* value;
+    int lineno = 0;
+    int error = 0;
+
+#if !INI_USE_STACK
+    line = (char*)malloc(INI_MAX_LINE);
+    if (!line) {
+        return -2;
+    }
+#endif
+
+    /* Scan through stream line by line */
+    while (reader(line, INI_MAX_LINE, stream) != NULL) {
+        lineno++;
+
+        start = line;
+#if INI_ALLOW_BOM
+        if (lineno == 1 && (unsigned char)start[0] == 0xEF &&
+                           (unsigned char)start[1] == 0xBB &&
+                           (unsigned char)start[2] == 0xBF) {
+            start += 3;
+        }
+#endif
+        start = lskip(rstrip(start));
+
+        if (*start == ';' || *start == '#') {
+            /* Per Python ConfigParser, allow '#' comments at start of line */
+        }
+#if INI_ALLOW_MULTILINE
+        else if (*prev_name && *start && start > line) {
+            /* Non-black line with leading whitespace, treat as continuation
+               of previous name's value (as per Python ConfigParser). */
+            if (!handler(user, section, prev_name, start) && !error)
+                error = lineno;
+        }
+#endif
+        else if (*start == '[') {
+            /* A "[section]" line */
+            end = find_char_or_comment(start + 1, ']');
+            if (*end == ']') {
+                *end = '\0';
+                strncpy0(section, start + 1, sizeof(section));
+                *prev_name = '\0';
+            }
+            else if (!error) {
+                /* No ']' found on section line */
+                error = lineno;
+            }
+        }
+        else if (*start && *start != ';') {
+            /* Not a comment, must be a name[=:]value pair */
+            end = find_char_or_comment(start, '=');
+            if (*end != '=') {
+                end = find_char_or_comment(start, ':');
+            }
+            if (*end == '=' || *end == ':') {
+                *end = '\0';
+                name = rstrip(start);
+                value = lskip(end + 1);
+                end = find_char_or_comment(value, '\0');
+                if (*end == ';')
+                    *end = '\0';
+                rstrip(value);
+
+                /* Valid name[=:]value pair found, call handler */
+                strncpy0(prev_name, name, sizeof(prev_name));
+                if (!handler(user, section, name, value) && !error)
+                    error = lineno;
+            }
+            else if (!error) {
+                /* No '=' or ':' found on name[=:]value line */
+                error = lineno;
+            }
+        }
+
+#if INI_STOP_ON_FIRST_ERROR
+        if (error)
+            break;
+#endif
+    }
+
+#if !INI_USE_STACK
+    free(line);
+#endif
+
+    return error;
+}
+
+/* See documentation in header file. */
+int ini_parse_file(FILE* file, ini_handler handler, void* user)
+{
+    return ini_parse_stream((ini_reader)fgets, file, handler, user);
+}
+
+/* See documentation in header file. */
+int ini_parse(const char* filename, ini_handler handler, void* user)
+{
+    FILE* file;
+    int error;
+
+    file = fopen(filename, "r");
+    if (!file)
+        return -1;
+    error = ini_parse_file(file, handler, user);
+    fclose(file);
+    return error;
+}

@@ -1,77 +1,83 @@
-/* inih -- simple .INI file parser
-
-inih is released under the New BSD license (see LICENSE.txt). Go to the project
-home page for more info:
-
-http://code.google.com/p/inih/
-
-*/
-
-#ifndef __INI_H__
-#define __INI_H__
-
-/* Make this header file easier to include in C++ code */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdio.h>
-
-/* Parse given INI-style file. May have [section]s, name=value pairs
-   (whitespace stripped), and comments starting with ';' (semicolon). Section
-   is "" if name=value pair parsed before any section heading. name:value
-   pairs are also supported as a concession to Python's ConfigParser.
-
-   For each name=value pair parsed, call handler function with given user
-   pointer as well as section, name, and value (data only valid for duration
-   of handler call). Handler should return nonzero on success, zero on error.
-
-   Returns 0 on success, line number of first error on parse error (doesn't
-   stop on first error), -1 on file open error, or -2 on memory allocation
-   error (only when INI_USE_STACK is zero).
-*/
-int ini_parse(const char* filename,
-              int (*handler)(void* user, const char* section,
-                             const char* name, const char* value),
-              void* user);
-
-/* Same as ini_parse(), but takes a FILE* instead of filename. This doesn't
-   close the file when it's finished -- the caller must do that. */
-int ini_parse_file(FILE* file,
-                   int (*handler)(void* user, const char* section,
-                                  const char* name, const char* value),
-                   void* user);
-
-/* Nonzero to allow multi-line value parsing, in the style of Python's
-   ConfigParser. If allowed, ini_parse() will call the handler with the same
-   name for each subsequent line parsed. */
-#ifndef INI_ALLOW_MULTILINE
-#define INI_ALLOW_MULTILINE 1
-#endif
-
-/* Nonzero to allow a UTF-8 BOM sequence (0xEF 0xBB 0xBF) at the start of
-   the file. See http://code.google.com/p/inih/issues/detail?id=21 */
-#ifndef INI_ALLOW_BOM
-#define INI_ALLOW_BOM 1
-#endif
-
-/* Nonzero to use stack, zero to use heap (malloc/free). */
-#ifndef INI_USE_STACK
-#define INI_USE_STACK 1
-#endif
-
-/* Stop parsing on first error (default is to keep parsing). */
-#ifndef INI_STOP_ON_FIRST_ERROR
-#define INI_STOP_ON_FIRST_ERROR 0
-#endif
-
-/* Maximum line length for any line in INI file. */
-#ifndef INI_MAX_LINE
-#define INI_MAX_LINE 200
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __INI_H__ */
+/* inih -- simple .INI file parser
+
+inih is released under the New BSD license (see LICENSE.txt). Go to the project
+home page for more info:
+
+https://github.com/benhoyt/inih
+
+*/
+
+#ifndef __INI_H__
+#define __INI_H__
+
+/* Make this header file easier to include in C++ code */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdio.h>
+
+/* Typedef for prototype of handler function. */
+typedef int (*ini_handler)(void* user, const char* section,
+                           const char* name, const char* value);
+
+/* Typedef for prototype of fgets-style reader function. */
+typedef char* (*ini_reader)(char* str, int num, void* stream);
+
+/* Parse given INI-style file. May have [section]s, name=value pairs
+   (whitespace stripped), and comments starting with ';' (semicolon). Section
+   is "" if name=value pair parsed before any section heading. name:value
+   pairs are also supported as a concession to Python's ConfigParser.
+
+   For each name=value pair parsed, call handler function with given user
+   pointer as well as section, name, and value (data only valid for duration
+   of handler call). Handler should return nonzero on success, zero on error.
+
+   Returns 0 on success, line number of first error on parse error (doesn't
+   stop on first error), -1 on file open error, or -2 on memory allocation
+   error (only when INI_USE_STACK is zero).
+*/
+int ini_parse(const char* filename, ini_handler handler, void* user);
+
+/* Same as ini_parse(), but takes a FILE* instead of filename. This doesn't
+   close the file when it's finished -- the caller must do that. */
+int ini_parse_file(FILE* file, ini_handler handler, void* user);
+
+/* Same as ini_parse(), but takes an ini_reader function pointer instead of
+   filename. Used for implementing custom or string-based I/O. */
+int ini_parse_stream(ini_reader reader, void* stream, ini_handler handler,
+                     void* user);
+
+/* Nonzero to allow multi-line value parsing, in the style of Python's
+   ConfigParser. If allowed, ini_parse() will call the handler with the same
+   name for each subsequent line parsed. */
+#ifndef INI_ALLOW_MULTILINE
+#define INI_ALLOW_MULTILINE 1
+#endif
+
+/* Nonzero to allow a UTF-8 BOM sequence (0xEF 0xBB 0xBF) at the start of
+   the file. See http://code.google.com/p/inih/issues/detail?id=21 */
+#ifndef INI_ALLOW_BOM
+#define INI_ALLOW_BOM 1
+#endif
+
+/* Nonzero to use stack, zero to use heap (malloc/free). */
+#ifndef INI_USE_STACK
+#define INI_USE_STACK 1
+#endif
+
+/* Stop parsing on first error (default is to keep parsing). */
+#ifndef INI_STOP_ON_FIRST_ERROR
+#define INI_STOP_ON_FIRST_ERROR 0
+#endif
+
+/* Maximum line length for any line in INI file. */
+#ifndef INI_MAX_LINE
+#define INI_MAX_LINE 200
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __INI_H__ */